Send document comments to nexus7k-docfeedback@cisco.com.
iii
Cisco Nexus 7000 Series NX-OS Unicast Routing Configuration Guide, Release 4.x
OL-20002-02
Preface
This document describes the configuration details for Cisco NX-OS unicast routing.
Audience
To use this guide, you must be familiar with IP and routing technology.
Organization
This document is organized into the following chapters:
Title Description
Chapter 1, “Overview” Presents an overview of unicast routing and brief
descriptions of each feature.
Chapter 2, “Configuring IPv4” Describes how to configure and manage IPv4, including
ARP and ICMP.
Chapter 3, “Configuring IPv6” Describes how to configure and manage IPv6, including
Neighbor Discovery Protocol and ICMPv6.
Chapter 4, “Configuring DNS” Describes how to configure DHCP and DNS clients.
Chapter 5, “Configuring WCCPv2” Describes how to configure WCCPv2.
Chapter 6, “Configuring OSPFv2” Describes how to configure the OSPFv2 routing protocol
for IPv4 networks.
Chapter 7, “Configuring OSPFv3” Describes how to configure the OSPFv3 routing protocol
for IPv6 networks.
Chapter 8, “Configuring EIGRP” Describes how to configure the Cisco EIGRP routing
protocol for IPv4 networks.
Chapter 9, “Configuring IS-IS” Describes how to configure the IS-IS routing protocol for
IPv4 and IPv6 networks.
Chapter 10, “Configuring Basic BGP” Describes how to configure basic features for the BGP
routing protocol for IPv4 and IPv6 networks.
Chapter 11, “Configuring Advanced BGP” Describes how to configure advanced features for the
BGP routing protocol for IPv4 and IPv6 networks,
including route redistribution and route aggregation.
To Next Page
Loading...
