EasyManua.ls Logo

Cisco Nexus 7000 Series - Page 415

Cisco Nexus 7000 Series
536 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Send document comments to nexus7k-docfeedback@cisco.com.
16-15
Cisco Nexus 7000 Series NX-OS Unicast Routing Configuration Guide, Release 4.x
OL-20002-02
Chapter 16 Configuring Route Policy Manager
Configuring Route Policy Manager
Command Purpose
set as-path
{tag
|
prepend
{last-as
number
|
as-1
[
as-2...
]}}
Example:
switch(config-route-map)# set as-path
prepend 10 100 110
Modifies an AS-path attribute for a BGP route. You
can prepend the configured number of last AS
numbers or a string of particular AS-path values
(as-1 as-2...as-n).
set comm-list
name
delete
Example:
switch(config-route-map)# set comm-list
BGPCommunity delete
Removes communities from the community
attribute of an inbound or outbound BGP route
update. Use the ip community-list command to
create the community list.
set community {none | additive | local-AS
| no-advertise | no-export |
community-1
[community-2...]}
Example:
switch(config-route-map)# set community
local-AS
Sets the community attribute for a BGP route
update.
Note When you use both the set community and
set comm-list delete commands in the
same sequence of a route map attribute, the
deletion operation is performed before the
set operation.
Note Use the send-community command in
BGP neighbor address family configuration
mode to propagate BGP community
attributes to BGP peers.
set dampening
halflife reuse suppress
duration
Example:
switch(config-route-map)# set dampening 30
1500 10000 120
Sets the following BGP route dampening
parameters:
halflife—The range is from 1 to 45 minutes.
The default is 15.
reuse—The range is from is 1 to 20000
seconds. The default is 750.
suppress—The range is from is 1 to 20000. The
default is 2000.
duration—The range is from is 1 to 255
minutes. The default is 60.
set extcomm-list
name
delete
Example:
switch(config-route-map)# set extcomm-list
BGPextCommunity delete
Removes communities from the extended
community attribute of an inbound or outbound
BGP route update. Use the ip extcommunity-list
command to create the extended community list.

Table of Contents

Other manuals for Cisco Nexus 7000 Series

Related product manuals