Cisco Nexus 7000 Series - Page 531

Send document comments to nexus7k-docfeedback@cisco.com.
Index
IN-9
Cisco Nexus 7000 Series NX-OS Unicast Routing Configuration Guide, Release 4.x
OL-20002-02
delete an instance 6-16
description 6-1 to 6-12
designated router 6-3
disable the feature 6-14
displaying statistics 6-45
enable the feature 6-14
example configuration 6-45
feature history (table) 6-47
graceful restart 6-11
guidelines 6-13
hello interval 6-2
hello packet 6-2
high availability 6-11
licensing requirements 6-12
limitations 6-13
link cost 6-6
link-state database 6-7
LSA 6-1
LSA flooding 6-6
LSA pacing 6-6
LSAs 6-5 to 6-7
LSA types (table) 6-6
MIBs 6-47, 19-19
modifying default timers 6-37
multiple instances 6-12
neighbors 6-2
not-so-stubby area 6-9
NSSA 6-9
opaque LSAs 6-7
prerequisites 6-13
redistributed routes 6-33
restarting an instance 6-41
route redistribution
description
6-10
route summarization
description
6-10
shutting down an instance 6-19
SPF optimization 6-12
stub area 6-8
stub area (figure) 6-9
stub router advertisements
description
6-12
unicast RIB 6-7
verifying configuration 6-44
virtualization support 6-12
virtual link 6-9
virtual link (figure) 6-10
OSPFv2 (Open Shortest Path First Version 2)
description
7-1
OSPFv2. See OSPF
OSPFv3
address families
7-8
adjacency 7-3
areas 7-5
comparison to OSPFv2 7-2
configuring ECMP 7-16
configuring filter lists 7-20
configuring graceful restart 7-36
configuring load balancing 7-16
configuring networks 7-17
configuring NSSA 7-23
configuring redistribution 7-28
configuring route summarization 7-32
configuring stub areas 7-21
configuring totally stubby areas 7-22
configuring virtual links 7-26
configuring with VRFs 7-38
creating an instance 7-14
default settings 7-41
description 7-1 to 7-12
disabling the feature 7-14
displaying statistics 7-40
enabling the feature 7-13
example configuration 7-41
feature history (table) 7-43
guidelines 7-13
licensing requirements 7-12
limitations 7-13