Managing the System
Network Shares
Cisco Small Business NSS300 Series Smart Storage Administration Guide 135
3
NFS Access Control
You can set the NFS access rights for a network share as described in the table
below. If you select No limit or Read only, you can specify the IP address or
domains that are allowed to connect to the share folder by NFS.
The format of an allowed IP address or domain name is shown below:
• Single server—A valid domain name, IP address, or host name that can be
resolved by a DNS server.
• Use wildcard characters to specify a series of servers—Use “*” or “?” to
specify the string criteria. When you use wildcard characters in a valid host
name, dot (.) is not included in wildcard characters. For example, when you
enter *.example.com, one.example.com is counted while
one.two.example.com is not counted.
• IP network—Can be specified in two formats. The first format is a.b.c.d/x,
where a.b.c.d refers to the network and x refers to number of bits of the
network mask. For example, the IP configuration can be specified as
192.168.0.0/24. The second valid format is a.b.c.d/network mask. In this
case, a.b.c.d refers to the network and the following value refers to the
network mask setting. For example, the same IP configuration can be
specified as192.168.100.8/255.255.255.0.
Refresh Click this icon to refresh the information of the share folder.
NOTE Share Folder status does not update
dynamically. You must click Refresh for the latest
status. By default, the system will automatically
refresh all shares by 2:00 a.m. (0200) based on the
NAS system clock.
Field Description
No Limit Unlimited access allows the user to create, read, write,
and delete files or folders in the network share and any
subfolders.
Read Only Read Only access allows the user to read files in the
network share and any subfolders but denies functions to
write, create, or delete.
Deny Access Denies all access to files and folders in the network share.
Action Icon Description
To Next Page
Loading...
Need help?
General
