Cisco NSS32 User Manual

Managing the System
Administration
Cisco Small Business NSS300 Series Smart Storage Administration Guide 70
3
- Single IP Address—Enter the IP address from which the connections to
this NAS are allowed.
- Specify IP addresses of certain network by setting IP address and
netmask—Enter the IP address and netmask of the network from which
the connections to this NAS are allowed.
- IP Range—Enter the IP address range from which the connections to this
NAS are allowed.
• Medium—Deny connections that are on the list. This is commonly referred
to as a black list. When the connection of a host server is denied, all protocols
of that server are not allowed to access the NAS. To add connections to the
list, click the green “+” icon and add the connection. Click the red “-” icon to
remove a connection.
- Single IP Address—Enter the IP address from which the connections to
this NAS are denied.
- Specify IP addresses of certain network by setting IP address and
netmask—Enter the IP address and netmask of the network from which
the connections to this NAS are rejected.
- IP Range—Enter the IP address range from which the connections to this
NAS are rejected.
• Low—Allow all connections regardless of connections in the list.
STEP 3 Click Apply to save the security settings. The network services will be restarted
and current connections to the server will be disconnected.
Network Access Protection
From the Administration > Security > Network Access Protection window, you
can enhance the security of the system and prevent unwanted intrusion. Network
access protection shields the NAS from Internet attacks by automatic IP blocking.
You can define the rules of IP blocking for different services or protocols.
NOTE If the Security Level is set as High, Network Access Protection will be
disabled since only connections from specified IP addresses are permitted
access.

Cisco NSS32 Specifications

General

Brand	Cisco
Model	NSS32
Category	Storage
Language	English