Managing the System
Administration
Cisco Small Business NSS300 Series Smart Storage Administration Guide 71
3
STEP 1 Choose Administration > Security > Network Access Protection from the
Navigation menu. The Network Access Protection window opens.
STEP 2 Click Enable network access protection to enable network access protection.
STEP 3 Select the different services or protocols and from the drop-down lists, select the
time intervals to define the rules. For example:
In 10 minutes, after unsucessful attempts for 10 times, block the IP for 5 minutes.
You can select the following services or protocols:
• SSH
• Te l n e t
• HTTP(S)
• FTP
• SAMBA
• AFP
STEP 4 Click Apply to save the settings.