Managing the System
Administration
Cisco Small Business NSS300 Series Smart Storage Administration Guide 95
3
UPnP Discovery Service
From the Administraton > Network Service Discovery > UPnP
Discovery Service window, you can enable UPnP discovery service. When a
device is added to the network, the UPnP discovery protocol allows the device to
advertise its services to the control points on the network. By enabling the UPnP
Discovery Service, the NAS can be discovered by any operating systems that
support UPnP.
To enable UPnP discovery service:
STEP 1 Choose Administration > Network Service Discovery > UPnP Discovery
Service from the Navigation menu. The UPnP Discovery Service window opens.
STEP 2 Click Enable UPnP Service.
STEP 3 Click Apply to save the setting.
Bonjour
From the Administraton > Network Service Discovery > Bonjour window, you can
broadcast the network services using Bonjour. By broadcasting the network
services with Bonjour, your Mac and Windows will automatically discover the
network services, such as FTP, which are running on the NAS without the need to
enter the IP addresses or configure the DNS servers.