• Rx Packets — Number of packets received on the port.
• Rx Bytes — Number of packets received, measured in bytes.
• Tx Packets — Number of packets sent on the port.
• Tx Bytes — Number of packets sent and measured in bytes.
• Packet Error — Details about the error packets.
• Refresh — To refresh the displayed statistics.
• Reset Counters — To reset all values to zero.
Port Status
• Port ID — Defined name and number of the port.
• Link Status — Status of the interface.
• Port Activity — Status of the port (example: port enabled or disabled or connected).
• Speed Status — The speed (in Mbps) of the device after auto negotiation.
• Duplex Status — Duplex mode: Half or Full.
• Auto Negotiation — Status of the auto negotiation parameter. When enabled (On), it detects the duplex
mode, and if the connection requires a crossover, automatically chooses the MDI or MDIX configuration
that matches the other end of the link.
WAN QoS Statistics
The WAN QoS Statics page displays the statistics of the outbound and inbound WAN QoS. To view the
device’s WAN QoS Statics page, click Status and Statistics > WAN QoS Statistics.
• Interface — Name of the interface.
• Policy Name — Name of the policy.
• Description — Description of the WAN QoS statistics.
• Clear Counters — Click to clear the counters.
Outbound QoS Statistics
• Queue — Number of outbound queues.
• Traffic Class — Name of traffic class assigned to queue.
• Packets Sent — Number of outbound packets of the traffic class sent.
• Packets Dropped — Number of outbound packets dropped.
Inbound QoS Statistics
• Queue — Number of inbound queues.
RV345/345P Administration Guide
8
Status and Statistics
WAN QoS Statistics
To Next Page
Loading...
Need help?
General
