CHAPTER 7
LAN
This section describes the local area network (LAN), which is a computer network that spans within a
relatively small area, such as in an office building, a school, or a home. This section contains the following
topics:
•
Port Settings, page 53
•
PoE Settings (RV345P), page 54
•
VLAN Settings, page 55
•
LAN/DHCP Settings, page 56
•
Static DHCP, page 59
•
802.1X Configuration, page 59
•
DNS Local Database, page 60
•
Router Advertisement, page 60
Port Settings
The Port Settings page displays the ports for EEE, Flow Control, Mode, Port Mirror, and Link Aggregation.
To configure the port settings for the LAN, follow these steps:
Step 1
Select LAN > Port Settings.
Step 2
In the Basic Per Port Configuration table, configure the following:
Lists the ports currently available on the router.Port
Check to enable the port to allow the settings. When this check box is disabled, all
settings on the port are lost.
Enabled
Check to allow port to consume less power during period of low data activity.EEE (Energy Efficient on
Ethernet)
RV345/345P Administration Guide
53
To Next Page
Loading...
