Connected Devices
The Connected Devices page lists all the connected devices on the router. To view this Connected Devices
page, click Status and Statistics > Connected Devices.
IPv4
• Hostname — Name of the connected device.
• IPv4 Address — Connected device’s IP Address.
• MAC Address — MAC address of the connected device.
• Type — Type of device IP address.
• Interface — The interface it is connected to.
IPv6
• IPv6 Address — The IPv6 address of the connected device.
• MAC Address — MAC address of the connected device.
Routing Status
Routing is the process of moving packets across a network from one host to a another. The Routing Status of
this process is displayed on a routing table. The routing table contains information about the topology of the
network immediately around it. To view the device’s Routing Status for IPv4 and IPv6, click Status and
Statistics > Routing Status.
IPv4 and IPv6 Routes
• Destination — IP Address and subnet mask of the connection.
• Next Hop — IP address of the next hop. Maximum number of hops (the maximum is 15 hops) that a
packet passes through.
• Metric — Number of routing algorithms when determining the optimal route for sending network traffic.
• Interface — Name of the interface to which the route is attached to.
• Source — Source of the route.
DHCP Bindings
The DHCP Bindings page displays the statistics of the DHCP client information such as IP address, MAC
address, Lease Expire Time and Type of Binding (static or dynamic). To view the device’s DHCP Bindings,
click Status and Statistics > DHCP Bindings.
In the DHCP Binding Table, the following is displayed:
RV345/345P Administration Guide
10
Status and Statistics
Connected Devices
To Next Page
Loading...
Need help?
General
