EasyManua.ls Logo

Cisco RV345

Cisco RV345
110 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Create a Site-to-Site VPN Connection
Step 1
On the Basic Settings tab, provide the following information:
Click Enable to enable the configuration.Enable
Enter a connection name for the VPN tunnel. This description is for reference purposes;
it does not have to match the name used at the other end of the tunnel.
Connection Name
Default - Auto Profile is already chosen.IPSec Profile
Select the interface (WAN1, WAN2, USB1, or USB2) from the drop-down list to use
for this tunnel.
Interface
Select Static IP, or FQDN from the drop-down list.Remote Endpoint
IKE Authentication Method
IKE peers authenticate each other by computing and sending a keyed hash of data that
includes the pre-shared key. If the receiving peer is able to create the same hash
independently using its Pre-shared key, it knows that both peers must share the same
secret, thus authenticating the other peer. Pre-shared keys do not scale well because
each IPSec peer must be configured with the Pre-shared key of every other peer with
which it establishes a session. Enter the Pre-shared Key, and click Enable to enable the
Minimum Pre-shared Key Complexity.
Preshared Key
The digital certificate is a package that contains information such as a certificate bearer's
identity: name or IP address, the certificate's serial number, the certificate's expiration
date, and a copy of the certificate bearer's public key. The standard digital certificate
format is defined in the X.509 specification. X.509 version 3 defines the data structure
for certificates. Select the certificate from the drop-down list.
Certificate
For Local Group Setup
Select Local WAN IP, Local FQDN, or Local User FQDN from the drop-down listLocal Identifier Type
Enter the identifier name or IP Address based on your selectionLocal Identifier
Select IP address or Subnet from the drop-down list.Local IP Type
Enter the IP address of the device that can use this tunnel.IP Address
Enter the subnet mask.Subnet Mask
Remote Group Setup
RV345/345P Administration Guide
81
VPN
Create a Site-to-Site VPN Connection

Table of Contents

Other manuals for Cisco RV345

Related product manuals