Cisco RV345 Administration Guide

Web Filtering
Web filtering is a feature that allows you to manage access to inappropriate websites. It can screen a client’s
web access requests to determine whether to allow or deny that website. To enable and configure web filtering,
follow these steps:
Step 1
Click Security > Web Filtering.
Step 2
On the Web Filtering section, select On or Off and click Apply.
Step 3
In the Web Filtering Policies table, click Add. To edit an existing policy and click Edit to modify it.
Step 4
On the Web Filtering — Add/Edit Policy page, enter the following information:
Specify a name for the web filtering policy you are creating.Policy Name
Enter a short description for the policy.Description
Check Enable to activate the policy.Enable
•
Click Edit and select the desired Filtering Level (select the appropriate web
categories to be filtered). Choose High, Medium, Low or Custom to define the
filtering extent. You can also choose the items from the Adult/Mature Content,
business/Investment, Entertainment, Illegal/Questionable, IT Resources,
Lifestyle/Culture, Other and Security categories. The incoming URL belonging
to the selected items are blocked.
•
Click Apply to go back to Web Filtering - Add/Edit Policy page. You can see the
selected web content listed in the Application List Table under Category.
•
Click Restore to Default Categories to restore default settings.
Category
Select the device type from the drop down list, to which the policy should be applicable.Device Type
Select the OS from the drop down list, to which the policy should be applicable.OS Type
Check to enable the web reputation analysis.Web Reputation
Select an IP group from the drop down list to which this policy should be applied.Applied on IP Group
Click Edit, then Add and define the following:
• White List — Click Add to define the Domain Name or Keyword to bypass this
policy.
• Black List — Click Add to define the Domain Name or Keyword that should be
blocked.
• Exclusion List — Click Add to specify the IP Address that is excluded from this
policy.
Click Apply.
Exception List
RV345/345P Administration Guide
99
Security
Web Filtering

Cisco RV345 Specifications

General

WAN Ports	2
LAN Ports	16
Max VPN Tunnels	50
Firewall Throughput	900 Mbps
RAM	512 MB
Flash Memory	256 MB
Gigabit Ethernet Ports	18
Firewall Protection	Yes
VPN Support	Yes
Wireless	No
Device Type	Router
Encryption	AES, 3DES
Operating Temperature	0 to 40 °C
Storage Temperature	-20 to 70°C (-4 to 158°F)
Humidity	10% to 85% noncondensing
USB Ports	2
Ports	18 x RJ-45