Cisco RV345 Administration Guide

Select None or TLS/SSL as the email encryption method.Email Encryption
Select the type of authentication from the drop-down list: None, Login, Plaintext or
MD5.
Authentication
Enter an email address to send to.Send Email to 1
Enter an email address to send to (optional).Send Email to 2
Enter an email address to send from.From Email Address
Step 3
Click Test Connectivity to Email Server to test connectivity.
Step 4
Click Apply.
User Accounts
You can create, edit, and delete local users and authenticate them using local database for various services
like PPTP, VPN Client, Web GUI login, and SSLVPN. This enables the administrators to control and allow
only the local users access the network.
To create local users and determine the password complexity, follow these steps:
Step 1
Select System Configuration > User Accounts.
Step 2
Under Local Users Password Complexity, check Enable to enable the password complexity.
Step 3
Configure the password complexity settings.
Enter the minimum length of the password to create a new password (Range 0 to 64,
Default 8).
Minimal password length
Enter the minimum number of character classes that should be used for the new password
(Range 0 to 4, Default 3). Compose a password using three of these four classes:
(Uppercase, letters, lower case letters, numbers or special characters).
Minimal number of
character classes
Enable to require the user to enter a different password when the current password
expires.
The new password must be
different than the current
one
Step 4
In the Local Users Membership List table, click Add to add a user on the router.
Step 5
In the Add User Account page, enter the following information:
Enter a username.Username
Enter a password.New Password
Confirm the password.New Password Confirm
RV345/345P Administration Guide
29
System Configuration
User Accounts

Cisco RV345 Specifications

General

Brand	Cisco
Model	RV345
Category	Network Router
Language	English