Step 7
You can also edit or delete a configuration by clicking Edit or Delete.
Step 8
Click Apply.
Some service providers do not allow to ping the default gateway. Please choose a valid remote host to detect
the network connectivity or simply disable the detection. Otherwise, the traffic will not be forwarded by the
device.
Note
Mobile Network
A mobile broadband modem is a type of modem that allows a laptop, a personal computer, or a router to
receive Internet access using a mobile broadband connection instead of using phone or cable lines.
To configure the Mobile Network, follow these steps:
Step 1
Select WAN > Mobile Network.
Step 2
In the Global Settings section, select the interface (USB1 or USB2) to apply the settings.
Step 3
In the Card Status section, click Connect to establish the connection.
Step 4
In the Service Type, select the type of service from the drop-down list.
Mobile Network Setup
To configure the Mobile Network Setup, follow these steps:
Step 1
In the Configuration Mode, select Auto to connect to the network automatically.
Step 2
Enter the SIM PIN - the pin code associated with your SIM card.
Step 3
Or, select Manual and to connect to the network manually and configure the following:
• Access Point Name — Enter the access point name provided by your mobile network service provider.
• Dial Number — Enter the number provided by your mobile network service provider for the Internet connection.
• Username and Password — Enter the username and password provided by your mobile network service provider.
• SIM PIN — Enter the PIN code associated with your SIM card.
• Server Name — Enter the name of the server.
• Authenticate — Select the option to authenticate.
Step 4
Select one for the following for the Connect Mode.
RV345/345P Administration Guide
42
WAN
Mobile Network
To Next Page
Loading...
Need help?
General
