Certificate
Certificates are important in the communication process. The certificate signed by a trusted Certificate Authority
(CA), ensures that the certificate holder is really who he claims to be. Without a trusted signed certificate,
data may be encrypted, however, the party you are communicating with may not be the one whom you think.
A list of certificates with the certificate details are displayed on this page. You can export a Self signed, local,
and CSR certificate. Or, you can import a CA, Local, or PKCS#12 certificate. You can also import a certificate
file (from PC/USB) to a new certificate.
If a device certificate is imported, it replaces its corresponding CSR certificate.
On Certificate Table, the certificates that are associated to the router are displayed. You can you delete, export,
view the details, or import a certificate that is listed in the Certificate Table.
Import Certificate
To import a certificate, follow these steps:
Step 1
Click Import Certificate.
Step 2
Select the type of certificate to import from the drop-down list:
•
Local Certificate
•
CA Certificate
•
PKCS#12 encoded file.
Step 3
Enter a certificate name. (For PKCS#12, you must enter a password).
Step 4
Check Import from PC and click Choose File to upload and import the certificate from a specific location.
Step 5
Check Import From USB and click Refresh to upload and import the certificate from a USB key.
Step 6
Click Upload.
Generate CSR/Certificate
Step 1
Click Generate CSR/Certificate.
Step 2
Select the type of certificate to generate from the drop-down list.
Step 3
Enter the following information:
Enter a name for certificate. Certificate name should not contain spaces or special
characters.
Certificate Name
Enter a name and select one of the following: IP Address, FQDN, or Email.Subject Alternative Name
RV345/345P Administration Guide
20
Administration
Certificate
To Next Page
Loading...
Need help?
General
