Cisco RV345

CHAPTER 3
Administration
This section describes the device's administration features and contains the following topics:
•
Reboot, page 15
•
File Management, page 16
•
Diagnostic, page 18
•
License, page 19
•
Certificate, page 20
•
Config Management, page 21
Reboot
The Reboot allows users to restart the device with active or inactive images.
To access Reboot page, follow these steps:
Step 1
Click Administration >Reboot.
Step 2
In the Active Image after Reboot section, select an option (Active Image x.x.xx.xx or Inactive Image x.x.xx.xx) from
the drop-down list.
Step 3
Select the preferred reboot option.
•
Reboot the device.
•
Return to factory default settings after reboot.
•
Return to factory default settings including certificates after reboot.
Step 4
Click Reboot to reboot device.
RV345/345P Administration Guide
15