EasyManuals Logo

Cisco RV345 Administration Guide

Cisco RV345
110 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #99 background imageLoading...
Page #99 background image
Mandatory Gateway Settings
Select the gateway interface (WAN1, WAN2, USB1 or USB2) from the drop-down
list.
Gateway Interface
Enter the port number of the gateway (Range 1 to 65535).Gateway Port
Default.Certificate File
Enter the IP address of the client address pool.Client Address Pool
Enter the client netmask.Client Netmask
Enter the client domain name.Client Domain
Enter the text to appear as login banner.Login Banner
Optional Gateway Settings
Enter the idle timeout in seconds (Range 60 to 86,400).Idle Timeout
Time it takes for the TCP or UDP session to time out after a period of idleness. Enter
the session timeout in seconds (Range 60 to 1,209,600).
Session Timeout
Sends periodic HELLO/ACK messages to check the status of the VPN tunnel. This
feature must be enabled on both ends of the VPN tunnel. Specify the interval between
HELLO/ACK messages in the Interval field. Enter the client DPD timeout in seconds
(Range 0 to 3600).
Client DPD Timeout
Sends periodic HELLO/ACK messages to check the status of the VPN tunnel. This
feature must be enabled on both ends of the VPN tunnel. Specify the interval between
HELLO/ACK messages in the Interval field. Enter the gateway DPD timeout in seconds
(Range 0 to 3600).
Gateway DPD Timeout
Ensures that your router is always connected to the Internet. Attempts to re-establish
the VPN connection if it is dropped. Enter the Keep Alive time in seconds (Range 0 to
600).
Keep Alive
Enter the time in seconds during the tunnel to be connected (Range 600 to 1,209,600).Lease Duration
Enter the size in bytes of a packet that can be sent over the network (Range 576 to
1406).
Max MTU
Enter the relay interval time in seconds (Range 0 to 43,200).Relay Interval
Step 3
Click Apply.
Step 4
On the Group Policies Server tab, click Add and provide the following information.
Basic Settings
Enter the policy name. Group policies that apply whole sets of attributes to a group of
users, rather than having to specify each attribute individually for each user.
Policy Name
Enter the IP address of the primary DNS server.Primary DNS
RV345/345P Administration Guide
93
VPN
SSL VPN

Table of Contents

Other manuals for Cisco RV345

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco RV345 and is the answer not in the manual?

Cisco RV345 Specifications

General IconGeneral
WAN Ports2
LAN Ports16
Max VPN Tunnels50
Firewall Throughput900 Mbps
RAM512 MB
Flash Memory256 MB
Gigabit Ethernet Ports18
Firewall ProtectionYes
VPN SupportYes
WirelessNo
Device TypeRouter
EncryptionAES, 3DES
Operating Temperature0 to 40 °C
Storage Temperature-20 to 70°C (-4 to 158°F)
Humidity10% to 85% noncondensing
USB Ports2
Ports18 x RJ-45

Related product manuals