Cisco WAP200 Administration Guide

Cisco WAP200 Wireless-G Access Point with Power Over Ethernet and Rangebooster v
Contents
Upgrading the Firmware 66
Rebooting the Access Point 67
Managing the Access Point’s Configuration 68
Verifying Access Point Status 69
Checking Local Network Status 69
Checking Wireless Status 71
Checking System Performance 72
Using Windows Help Menus 74
TCP/IP 74
Shared Resources 74
Network Neighborhood/My Network Places 74
Appendix A: Troubleshooting 75
Appendix B: Wireless Security Checklist 80
Security Checklist 80
Change the Default Wireless Network Name or SSID 81
Disable SSID Broadcast 81
Change the Default Password 81
Change the Administrator’s Password Regularly 81
Enable MAC Address Filtering 82
Change the SSID Periodically 82
Enable Encryption 82
General Network Security Guidelines 84
Additional Security Tips 84
Appendix C: Specifications 85
Specifications 85
Setup/Configuration 85
Management 86
Operating Modes 86
Wireless 86

Cisco WAP200 Specifications

General

Networking standards	IEEE 802.3af, IEEE 802.11b, IEEE 802.11g
Supports ISDN connection	No
DHCP client	Yes
DHCP server	-
Security algorithms	WEP, WPA, WPA2
Dimensions (WxDxH)	170 x 195 x 205 mm
Storage temperature (T-T)	20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 85 %
Wi-Fi standards	802.11g, 802.11b
Top Wi-Fi standard	802.11g
Ethernet LAN (RJ-45) ports	1
Product color	Gray

Weight and Dimensions

Weight	400 g