Cisco WAP321 - Chapter 7: Client Quality of Service; Client Qos Global Settings; Acl

7
Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE 116
Client Quality of Service
This chapter provides an overview of Client quality of service (QoS) and explains
the QoS features available from the Client QoS menu. It contains these topics:
• Client QoS Global Settings
• ACL
• Class Map
• Policy Map
• Client QoS Association
• Client QoS Status
Client QoS Global Settings
You can use the Client QoS Global Settings page to enable or disable quality of
service functionality on the WAP device.
If you disable Client QoS Mode, all ACLs, rate limiting, and DiffServ configurations
are globally disabled.
If you enable this mode, you can also enable or disable Client QoS mode on
particular VAPs. See the Client QoS Mode setting on the Client QoS Association
page.
ACL
ACLs are a collection of permit and deny conditions, called rules, that provide
security by blocking unauthorized users and allowing authorized users to access
specific resources. ACLs can block any unwarranted attempts to reach network
resources.