Status and Statistics
Email Alert Status
Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE 26
2
• FCS Error Count—Count of FCS errors detected in a received MPDU
frame.
• Transmit Retry Count—Number of times an MSDU is successfully
transmitted after one or more retries.
• ACK Failure Count—Count of ACK frames not received when expected.
• RTS Failure Count—Count of CTS frames not received in response to an
RTS frame.
• WEP Undecryptable Count—Number of frames discarded because they
could not be decrypted by the radio. Frames can be discarded because the
frame was not encrypted, or it was encrypted with a privacy option not
supported by the WAP device.
• RTS Success Count—Count of CTS frames received in response to an
RTS frame.
• Multiple Retry Count—Number of times an MSDU is successfully
transmitted after more than one retry.
• Frames Transmitted Count—Count of each successfully transmitted
MSDU.
You can click Refresh to refresh the screen and show the most current information.
Email Alert Status
The Email Alert Status page provides information about the email alerts sent
based on the syslog messages generated in the WAP device. To view the Email
Alert Status page, select Status and Statistics > Email Alert Status in the
navigation pane.
• Email Alert Status—The Email Alert configured status. The status is either
Enabled or Disabled. The default is Disabled.
• Number of Emails Sent—The total number of emails sent. The range is an
unsigned integer of 32 bits. The default is 0.
• Number of Emails Failed—The total number of email failures. The range is
an unsigned integer of 32 bits. The default is 0.
• Time Last Email Sent—The day, date, and time when the last email was
sent.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
