Cisco WAP321 Administration Guide

10
Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE 157
Single Point Setup
This chapter describes how to configure Single Point Setup over multiple WAP
devices.
It includes these topics:
• Single Point Setup Overview
• Access Points
• Sessions
• Channel Management
• Wireless Neighborhood
Single Point Setup Overview
The Cisco WAP121 and WAP321 devices support Single Point Setup. Single Point
Setup provides a centralized method to administer and control wireless services
across multiple devices. You use Single Point Setup to create a single group, or
cluster, of wireless devices. After the WAP devices are clustered, you can view,
deploy, configure, and secure the wireless network as a single entity. After a
wireless cluster is created, Single Point Setup also facilitates channel planning
across your wireless services to reduce radio interference and maximize
bandwidth on the wireless network.
When you first set up your WAP device, you can use the Setup Wizard to configure
Single Point Setup or join an existing Single Point Setup. If you prefer not to use the
Setup Wizard, you can use the web-based configuration utility.

Cisco WAP321 Specifications

General

Modulation	OFDM
Frequency band	2.4 - 5 GHz
Number of users	32 user(s)
Channels quantity	13 channels
Networking standards	IEEE 802.11b, IEEE 802.11e, IEEE 802.11g, IEEE 802.11i, IEEE 802.11n, IEEE 802.1Q, IEEE 802.3, IEEE 802.3u, IEEE 802.3x
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Maximum data transfer rate	300 Mbit/s
Quality of Service (QoS) support	Yes
Internal	No
Certification	FCC class B, CE, IC, Wi-Fi
LED indicators	Power, WAN, WLAN
Supported network protocols	IEEE802.11b/g/n/i/e, 802.3, 802.3u, 802.1X, IPv4, IPv6, HTTP/HTTPS, SNMP
WAN connection	Wi-Fi
Ethernet LAN (RJ-45) ports	1
Security algorithms	WPA2, WPS
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C

Weight and Dimensions

Weight	275 g
Dimensions (WxDxH)	169.08 x 169.42 x 35 mm