Status and Statistics
Associated Clients
Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE 19
2
Each network interface that is configured as a WorkGroup Bridge interface shows
these fields:
• Network Interface—Name of the Ethernet or VAP interface.
• Status and Statistics—Whether the interface is disconnected or is
administratively configured as up or down.
• VLAN ID—Virtual LAN (VLAN) ID. You can use VLANs to establish multiple
internal and guest networks on the same WAP device. The VLAN ID is set on
the VAP tab.See Configuring VAPs.
• Name (SSID)—Wireless network name. Also known as the SSID, this
alphanumeric key uniquely identifies a wireless local area network. The
SSID is set on the VAP tab. See Configuring VAPs.
Additional information appears for the transmit and receive direction for each
WorkGroup Bridge interface:
• Total Packets—The total number of packets bridged between the wired
clients in the WorkGroup Bridge and the wireless network.
• Total Bytes—The total number of bytes bridged between the wired clients
in the WorkGroup Bridge and the wireless network.
You can click Refresh to refresh the screen and show the most current information.
Associated Clients
You can use the Associated Clients page to view the client stations associated
with a particular access point.
To show the Associated Clients page, select Status and Statistics > Associated
Clients in the navigation pane.
The associated stations are shown along with information about packet traffic
transmitted and received for each station.
• Total Number of Associated Clients—The total number of clients currently
associated with the WAP device.
• Network Interface—The VAP the client is associated with.
• Station—The MAC address of the associated wireless client.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
