Cisco WAP321 Administration Guide

8
Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE 134
Simple Network Management Protocol
This chapter describes how to configure the Simple Network Management
Protocol (SNMP) to perform configuration and statistics gathering tasks.
It contains these topics:
• SNMP Overview
• General SNMP Settings
• Views
• Groups
• Users
• Targets
SNMP Overview
SNMP defines a standard for recording, storing, and sharing information about
network devices. SNMP facilitates network management, troubleshooting, and
maintenance.
The WAP device supports SNMP versions 1, 2, and 3. Unless specifically noted, all
configuration parameters apply to SNMPv1 and SNMPv2c only. Key components
of any SNMP-managed network are managed devices, SNMP agents, and a
management system. The agents store data about their devices in Management
Information Bases (MIBs) and return this data to the SNMP manager when
requested. Managed devices can be network nodes such as WAP devices,
routers, switches, bridges, hubs, servers, or printers.
The WAP device can function as an SNMP managed device for seamless
integration into network management systems.

Cisco WAP321 Specifications

General

Modulation	OFDM
Frequency band	2.4 - 5 GHz
Number of users	32 user(s)
Channels quantity	13 channels
Networking standards	IEEE 802.11b, IEEE 802.11e, IEEE 802.11g, IEEE 802.11i, IEEE 802.11n, IEEE 802.1Q, IEEE 802.3, IEEE 802.3u, IEEE 802.3x
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Maximum data transfer rate	300 Mbit/s
Quality of Service (QoS) support	Yes
Internal	No
Certification	FCC class B, CE, IC, Wi-Fi
LED indicators	Power, WAN, WLAN
Supported network protocols	IEEE802.11b/g/n/i/e, 802.3, 802.3u, 802.1X, IPv4, IPv6, HTTP/HTTPS, SNMP
WAN connection	Wi-Fi
Ethernet LAN (RJ-45) ports	1
Security algorithms	WPA2, WPS
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C

Weight and Dimensions

Weight	275 g
Dimensions (WxDxH)	169.08 x 169.42 x 35 mm