EasyManuals Logo

Cisco WAP321 Administration Guide

Cisco WAP321
179 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
Status and Statistics
TSPEC Status and Statistics
Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE 23
2
TSPEC Status and Statistics
The TSPEC Status and Statistics page provides this information:
Summary information about TSPEC sessions by radio.
Summary information about TSPEC sessions by VAP.
Real-time transmit and receive statistics for the radio interface and the
network interface(s).
All of the transmit and receive statistics shown are totals since the WAP device
was last started. If you reboot the WAP device, these figures indicate transmit and
receive totals since the reboot.
To view TSPEC status and statistics, select Status and Statistics > TSPEC Status
and Statistics in the navigation pane.
The TSPEC Status and Statistics page provides this status information for the
WLAN (Radio) and VAP interfaces:
Network Interface—Name of the Radio or VAP interface.
Access Category—Current Access Category associated with this Traffic
Stream (voice or video).
StatusWhether the TSPEC session is enabled (up) or not (down) for the
corresponding Access Category.
NOTE Status is a configuration status (it does not necessarily represent the
current session activity).
Active Traffic Stream—Number of currently active TSPEC Traffic Streams
for this radio and Access Category.
Traffic Stream Clients—Number of Traffic Stream clients associated with
this radio and Access Category.
Medium Time AdmittedTime allocated for this Access Category over the
transmission medium to carry data. This value should be less than or equal
to the maximum bandwidth allowed over the medium for this TS.
Medium Time UnallocatedTime of unused bandwidth for this Access
Category.
These statistics appear separately for the transmit and receive paths on the
wireless radio interface:

Table of Contents

Other manuals for Cisco WAP321

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco WAP321 and is the answer not in the manual?

Cisco WAP321 Specifications

General IconGeneral
ModulationOFDM
Frequency band2.4 - 5 GHz
Number of users32 user(s)
Channels quantity13 channels
Networking standardsIEEE 802.11b, IEEE 802.11e, IEEE 802.11g, IEEE 802.11i, IEEE 802.11n, IEEE 802.1Q, IEEE 802.3, IEEE 802.3u, IEEE 802.3x
Ethernet LAN data rates10, 100, 1000 Mbit/s
Maximum data transfer rate300 Mbit/s
Quality of Service (QoS) supportYes
InternalNo
CertificationFCC class B, CE, IC, Wi-Fi
LED indicatorsPower, WAN, WLAN
Supported network protocolsIEEE802.11b/g/n/i/e, 802.3, 802.3u, 802.1X, IPv4, IPv6, HTTP/HTTPS, SNMP
WAN connectionWi-Fi
Ethernet LAN (RJ-45) ports1
Security algorithmsWPA2, WPS
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 40 °C
Weight and Dimensions IconWeight and Dimensions
Weight275 g
Dimensions (WxDxH)169.08 x 169.42 x 35 mm

Related product manuals