Cisco WAP321 Administration Guide

Captive Portal
Failed Authentication Clients
Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE 156
9
• Verification—The method the client attempted to use to authenticate on the
Captive Portal, which can be one of these values:
- Guest—The user does not need to be authenticated by a database.
- Local—The WAP device uses a local database to authenticated users.
- RADIUS—The WAP device uses a database on a remote RADIUS
server to authenticate users.
• VAP ID—The VAP that the user is associated with.
• Radio ID—The ID of the radio. Because the WAP321 has a single radio, this
field shows Radio1.
• Captive Portal ID—The ID of the Captive Portal instance to which the user
is associated.
• Failure Time—The time that the authentication failure occurred. A
timestamp is included that shows the time of the failure.
You can click Refresh to show the latest data from the WAP device.

Cisco WAP321 Specifications

General

Modulation	OFDM
Frequency band	2.4 - 5 GHz
Number of users	32 user(s)
Channels quantity	13 channels
Networking standards	IEEE 802.11b, IEEE 802.11e, IEEE 802.11g, IEEE 802.11i, IEEE 802.11n, IEEE 802.1Q, IEEE 802.3, IEEE 802.3u, IEEE 802.3x
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Maximum data transfer rate	300 Mbit/s
Quality of Service (QoS) support	Yes
Internal	No
Certification	FCC class B, CE, IC, Wi-Fi
LED indicators	Power, WAN, WLAN
Supported network protocols	IEEE802.11b/g/n/i/e, 802.3, 802.3u, 802.1X, IPv4, IPv6, HTTP/HTTPS, SNMP
WAN connection	Wi-Fi
Ethernet LAN (RJ-45) ports	1
Security algorithms	WPA2, WPS
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C

Weight and Dimensions

Weight	275 g
Dimensions (WxDxH)	169.08 x 169.42 x 35 mm