EasyManuals Logo

Cisco WAP321 Administration Guide

Cisco WAP321
179 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #125 background imageLoading...
Page #125 background image
Client Quality of Service
ACL
Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE 123
7
Source MAC Address—Select this field and enter the source MAC address
to compare against an Ethernet frame.
Source MAC Mask—Select this field and enter the source MAC address
mask specifying which bits in the source MAC to compare against an
Ethernet frame.
For each bit position in the MAC mask, a 0 indicates that the corresponding
address bit is significant and a 1 indicates that the address bit is ignored. For
example, to check only the first four octets of a MAC address, a MAC mask
of 00:00:00:00:ff:ff is used. A MAC mask of 00:00:00:00:00:00 checks all
address bits and is used to match a single MAC address.
Destination MAC Address—Select this field and enter the destination MAC
address to compare against an Ethernet frame.
Destination MAC Mask—Enter the destination MAC address mask to
specify which bits in the destination MAC to compare against an Ethernet
frame.
For each bit position in the MAC mask, a 0 indicates that the corresponding
address bit is significant and a 1 indicates that the address bit is ignored. For
example, to check only the first four octets of a MAC address, a MAC mask
of 00:00:00:00:ff:ff is used. A MAC mask of 00:00:00:00:00:00 checks all
address bits and is used to match a single MAC address.
VLAN ID—Select this field and enter the specific VLAN ID to compare
against an Ethernet frame.
This field is located in the first/only 802.1Q VLAN tag.
STEP 5 Click Save. The changes are saved to the Startup Configuration.
NOTE To delete an ACL, ensure that it is selected in the ACL Name-ACL Type list, select
Delete ACL, and click Save.

Table of Contents

Other manuals for Cisco WAP321

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco WAP321 and is the answer not in the manual?

Cisco WAP321 Specifications

General IconGeneral
ModulationOFDM
Frequency band2.4 - 5 GHz
Number of users32 user(s)
Channels quantity13 channels
Networking standardsIEEE 802.11b, IEEE 802.11e, IEEE 802.11g, IEEE 802.11i, IEEE 802.11n, IEEE 802.1Q, IEEE 802.3, IEEE 802.3u, IEEE 802.3x
Ethernet LAN data rates10, 100, 1000 Mbit/s
Maximum data transfer rate300 Mbit/s
Quality of Service (QoS) supportYes
InternalNo
CertificationFCC class B, CE, IC, Wi-Fi
LED indicatorsPower, WAN, WLAN
Supported network protocolsIEEE802.11b/g/n/i/e, 802.3, 802.3u, 802.1X, IPv4, IPv6, HTTP/HTTPS, SNMP
WAN connectionWi-Fi
Ethernet LAN (RJ-45) ports1
Security algorithmsWPA2, WPS
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 40 °C
Weight and Dimensions IconWeight and Dimensions
Weight275 g
Dimensions (WxDxH)169.08 x 169.42 x 35 mm

Related product manuals