2 Introduction
The Eclipse HX system is a digital point-to-point intercom platform, designed to
seamlessly integrate your entire your entire intercom infrastructure (digital,
wireless, IP-based and analog intercom systems). The system comprises
matrices, interface cards and modules, user panels and interface frames.
At the heart of the system is the central matrix, comprising a matrix frame and
the highly intuitive EHX configuration software, run from an external PC. This
user guide describes how to use the Eclipse HX-Median, a 6RU matrix with 2
CPU and 7 interface card slots and 8 built-in interface module slots.
This guide:
Provides an overview of the Eclipse HX-Median, including the interface
modules and cards that you can fit to the matrix.
Describes how to install, use and maintain an Eclipse HX-Median.
Describes how to use E-FIB fiber interface cards to link matrices
together.
Describes how to use the E-MADI64, E-QUE, IVC-32 and LMC-64
interface cards.
Provides detailed specifications.
2.1 Further information
For more detailed information about installing an Eclipse HX system, see the
Eclipse HX Matrix Installation Guide.
For more information about EHX configuration software, see your EHX
documentation, including EHX Help (integrated with your software).
For more information about any of the Eclipse HX system components
referenced in this guide (including matrices, interface cards, interface modules
and EHX configuration software), see the specific manual / documentation for
that device or software.
Eclipse HX documentation is available from:
Your product DVD-ROM.
The Clear-Com website (http://www.clearcom.com/product/digital-
matrix).
For sales information, see your Clear-Com sales representative. For contact
information, see Page 2 of this guide.
To Next Page
Loading...
Need help?
General
