Clear-Com LQ series User Manual

26
399G116 Rev D
Support Info provides a ‘snapshot’ of the device’s operational information for
troubleshooting purposes.
4.3.2 Network information page
The LQ unit’s network information is configured on this page.
4.3.2.1 DHCP or static IP allocation
DHCP is set by default and allows the device to automatically configure its network
information.
Figure 4-3 Network: DHCP mode
In some cases you may have to allocate the network information statically. See
Fig. 4-4 below.

Clear-Com LQ series Specifications

General

Brand	Clear-Com
Model	LQ series
Category	Recording Equipment
Language	English