Figure 4-4 Network: static IP allocation
For more information on external connectivity see 9 Network configuration.
For more information on static IP allocation see 9 Network configuration and 5
Linking.
4.3.3 Linking page
This is where the role of the LQ device is set to either Link-Master or, if connecting
to a Link-Group, Link-Member.
Each group must have a Link-Master, which is the default mode of operation.
Each Link-Member in the group must be linked to the Link-Master here.
To join a Link-Group:
1) Configure Link-Member role.
To Next Page
Loading...
