All content © 2020, cmotion GmbH. All specications are subject to change without further notice.
http://www.cmotion.eu
page 41 of 120
6.2.3.1.1.3. Region
The region menu allows you to change the RF settings according to legal regulations
of the country / region, you are operating in. Changing the region settings on the cPRO
/ cPRO PLUS / cPRO ONE hand unit will automatically change the region settings on
the connected cPRO motor / cPRO camin if a wireless connection is established. The
corresponding country code will illuminate on the cPRO motor´s / cPRO camin´s display.
Note: Make sure that you select the proper area you are operating the device in. All available
region settings comply with Part 15 of the FCC rules.
NOTICE
It may not be legal to operate the cPRO / cPRO PLUS / cPRO ONE hand unit in a country/
region other than the country/region selected in the region menu. Select ROW (Rest of world)
or use the device in hard-wired mode if you are unsure of the correct region setting.
Region Setting Country code
Australia AU
Canada CA
China CN
Egypt EG
Europe EU
Hong Kong HK
India IN
Japan JP
New Zealand NZ
Philippines PH
Singapore SG
South Africa ZA
South Korea KR
Taiwan TW
Thailand TH
UAE (United Arab Emirates) AE
USA US
ROW (Rest of world) WORLD
6.2.3.1.2. Unit
The unit menu allows you to change the system unit to imperial or metric.
Note: Changing the system unit from the cPRO / cPRO PLUS / cPRO ONE hand unit will
change the unit settings on all connected LBUS devices exept cameras connected through
the CAM connector.
To Next Page
Loading...
