cmotion cPRO - Unload; Save

All content © 2020, cmotion GmbH. All specications are subject to change without further notice.
http://www.cmotion.eu
page 56 of 120
(MB1), or the HOME button, you will be redirected to the favorites list when reentering the
load lens menu directly, or through the user button function “load lens”. This allows you
to quickly load a new lens le from your favorites list.
UB2 allows you to change the display order of your lens les using the following categories:
• custom text, this will display all of your lenses in reference to the name which was
assigned to them when each lens le was created.
• focal length or zoom range, this will display your lenses in reference to the
focal length or zoom range which was assigned to them when each lens ie was
created.
• T-stop, this will display your lenses in reference to the T-stop which was assigned
to them when each lens le was created.
UB3 allows you to activate and deactivate advanced lens information. This will display
information about your lens le including manufacturer, serial number, weather the le
was created from a duplicate le, whether it was created as a metric or imperial lens, and
whether it is selected as one of your “favorites”. While viewing advanced lens information,
you can use the thumb wheel to scroll through the lens les.
Note: When 2 or 3 cPRO / cPRO PLUS or cPRO ONE hand units are connected within the
same wireless network and a new lens le is loaded on 1 unit, this new lens le will be shared
temporarily and displayed on all connected hand units automatically. However, because this
lens le is only shared temporarily, it will not be available on the other hand unit/s once a lens
is loaded from their own internal lens database. To save the temporary lens le permanently
on the 2nd / 3rd cPRO / cPRO PLUS or cPRO ONE hand unit, go to the LENS menu (of the
hand unit you want to save the lens to) and select “Save”.The lens le will now be saved in
the internal memory.
6.2.3.3.2. Unload
The unload menu allows you to unload an active lens le. Selecting unload will unload the
lens le without further conrmation required.
Note: If there is no lens loaded on the hand unit, advanced cPRO features will be disabled
and the main screen will only display a percentage of the motors calibrated range.
6.2.3.3.3. Save
When 2 or 3 cPRO / cPRO PLUS or cPRO ONE hand units are connected within the same
wireless network and a new lens le is loaded on 1 unit, this new lens le will be shared
temporarily and displayed on all connected hand units automatically. However, because
this lens le is only shared temporarily, it will not be available on the other hand unit/s
once a lens is loaded from their own internal lens database. To save the lens le to the
corresponding hand unit/s permanently, use the save option in the lens menu. This will
save the transferred lens le to their internal memory automatically.