cmotion cPRO - Lock; Joystick; Control; Sensitivity

All content © 2020, cmotion GmbH. All specications are subject to change without further notice.
http://www.cmotion.eu
page 52 of 120
6.2.3.2.2.4. Lock
The lock menu allows you to lock the slider (e.g. if shooting with a locked o camera).
A small red lock will be displayed in the status bar on all main screens. The letter “S” for
slider will illuminate each time you move the slider. The slider illumination will start ashing
red, indicating that the slider is locked and no motor control is possible.
6.2.3.2.3. Joystick
(cPRO / cPRO PLUS hand unit feature only, not available for cPRO ONE hand unit)
The joystick menu contains all settings related to the joystick control interface and consists
of:
Control (status)
Sensitivity
Speed
Lock (status)
6.2.3.2.3.1. Control
The control menu allows you to assign the axis you want to control (Focus / Iris / Zoom /
Filter / Aux / O) to the joystick. If you select O, the joystick will have no control over any
axis and will turn the illuminated position inticator o.
6.2.3.2.3.2. Sensitivity
The sensitivity menu allows you to adjust the touch sensitivity of the micro-force joystick
to Min, Mid or Max. At Min, the joystick needs more preasure to react. At Max, the joystick
will respond to a lighter touch.
6.2.3.2.3.3. Speed
The speed menu allows you to adjust the motor speed of the joystick´s assigned axis. Use
the thumb wheel to increase or decrease the motor speed. Press select to conrm your
speed settings.