cmotion cPRO - Frame Rate; Shutter; Iso; White Balance

All content © 2020, cmotion GmbH. All specications are subject to change without further notice.
http://www.cmotion.eu
page 86 of 120
6.2.3.6.1. Frame Rate
The frame rate menu allows you to change FPS depending on camera specic capabilities.
For further information, please refer to the corresponding camera manual.
6.2.3.6.2. Shutter
The shutter menu allows you to change shutter speed or shutter angle depending on
camera specic capabilities. For further information, please refer to the corresponding
camera manual.
Depending on the camera settings, shutter speed or shutter angle will be displayed on the
cPRO / cPRO PLUS / cPRO ONE hand unit.
6.2.3.6.3. ISO
The ISO menu allows you to change the light sensitivity depending on camera specic
capabilities. For further information, please refer to the corresponding camera manual.
6.2.3.6.4. White Balance
The white balance menu allows you to change the color temperature depending on
camera specic capabilities. For further information, please refer to the corresponding
camera manual.
6.2.3.6.5. ND Filter
The ND lter menu allows you to change internal camera ND lters depending on camera
specic capabilities. For further information, please refer to the corresponding camera
manual.
6.2.3.6.6. Playback
The playback menu allows you to playback clips from the camera, depending on camera
specic capabilities. For further information, please refer to the corresponding camera
manual.
cPRO allows you to replay the last clip or to select a clip from the cameras clip list,
depending on camera specic capabilities.
In order to playback the last recorded clip, simply tap the PLAY icon on the playback
screen or press and hold MB2. The clip list will open the last recorded clip and the camera
will immediately switch to playback mode. Press the select button (MB2) again in order