cmotion cPRO - Delete; Import from USB

All content © 2020, cmotion GmbH. All specications are subject to change without further notice.
http://www.cmotion.eu
page 68 of 120
6.2.3.3.7. Delete
The delete menu allows you to delete an individual lens le or multiple lens les from the
cPRO / cPRO PLUS or cPRO ONE hand unit’s internal memory.
To nd the right lens le quickly, UB2 allows you to sort your lens les by:
• custom text, the name which was assigned to each lens le when it was created.
• focal length or zoom range, the focal length or zoom range which was assigned
to each lens le when it was created.
• T-stop, the open T-stop which was assigned to each lens le when it was created.
UB3 allows you to activate and deactivate advanced lens information. This will display
information about your lens le including manufacturer, serial number, weather the le
was created from a duplicate le, whether it was created as a metric or imperial lens, and
whether it is selected as one of your “favorites”. While viewing advanced lens information,
you can use the thumb wheel to scroll through the lens les.
Press select (MB2) and the selected lens le will turn green. You can select or unselect
multiple lens les one after another or select and unselect all. To delete the lens les,
simply press “delete” (MB3). A popup menu will ask you to conrm again to delete the
highlighted lens les. If you press delete, the highlighted lens les will be deleted and
cannot be recovered. If you want to choose dierent lens les to delete, simply press
“back” (MB1) or swipe right to return to the lens le list.
Note: You cannot use the delete menu on the cPRO hand unit to delete lens les from a USB
drive. To delete any lens les from your USB, please use a computer.
6.2.3.3.8. Import from USB
The import from USB menu allows you to import lens les (.cml) from an archive to the
cPRO / cPRO PLUS or cPRO ONE hand unit’s internal memory.
Note: In order to import lens les (.cml), a USB stick formated in ExFAT or FAT32 loaded
with the appropriate lens les needs to be inserted in the USB slot on the back side of the
cPRO / cPRO PLUS or cPRO ONE hand unit. The USB drive will be recognized and mounted
automatically.
To identify the correct lens le quickly and easily, UB3 allows you to activate and deactivate
the advanced lens information. When active, this will display additional information about
the lens le.
Note: When selecting a lens les to import from USB, it is not possible to scroll through
the list of lenses while the advanced lens information is active. Press UB3 to deactivate
advanced information and return to the lens list again.
A selected lens le from the dynamic list (MB2) will turn green. You can select or unselect
multiple lens les one after another or select and unselect all. Press import (MB3) in
order to import the selected lens les. The lens les will be imported without further
conrmation required.
Note: In order to prevent lens les which have the same name to be overwritten, only lens
les which are not yet stored on the cPRO / cPRO PLUS or cPRO ONE hand unit’s internal
memory will be imported.