cmotion cPRO - 6.2.3.6. CAMERA

All content © 2020, cmotion GmbH. All specications are subject to change without further notice.
http://www.cmotion.eu
page 84 of 120
6.2.3.6. CAMERA
The camera menu is only visible when an ARRI, RED or SONY camera is connected to
the cPRO motor’s / camin’s CAM interface. Depending on the camera make and model,
camera specic settings can be changed.*
These consists of:
Frame Rate
Shutter
ISO
White Balance
ND Filter
Playback
Camera Buttons
Please refer to the chart below for a detailed overview of available control features.
Control Features*
Display Features*
* license key required
** available with cPRO software release 4.0 or higher
x = can be controlled / displayed
- = can NOT be controled / displayed