All content © 2020, cmotion GmbH. All specications are subject to change without further notice.
http://www.cmotion.eu
page 96 of 120
6.2.3.8.2. User button functions
User button function Description
O turns the user button o / no function / the
user button illumination will turn o
Knob limits set please refer to section “6.2.3.2.1.3. Knob
limits” on page 48 in this manual
*Slider limits set please refer to section “6.2.3.2.2.2. Slider
limits” on page 50 in this manual
*Joystick limits set sets motor + control limits to the axis
controlled by the joystick (electronic hard
stops)
Focus calibration calibrates the focus motor only
Iris calibration calibrates the iris motor only
Zoom calibration calibrates the zoom motor only
Calibration all calibrates all connected motors at once
*ZAP sets the joystick speed to maximum as
long as the button is being pressed
*Joystick speed up turns the joystick speed up (press and hold
to speed the adjustment up)
*Joystick speed down turns the joystick speed down (press and
hold to speed the adjustment up)
Autofocus press activates autofocus as long as the user
button is being pressed / after releasing
the user button, the focus will move to the
preset knob position.
Autofocus toggle activates autofocus by a single press of the
user button / press again to deactivate /
after deactivating the autofocus, the focus
will move to the preset knob position.
Autofocus pinpoint This user button function takes continuous
readings from the rangender and focuses
automatically. If the user button is pressed
and held, autofocus will remain active un-
til the button is relased. After releasing
the user button, the focus will stay at the
last measured distance. Turning the focus
knob passed the measured position re-
gains manual focus control.
Autofocus catch In order to use the Autofocus catch func-
tion, you rst need to activate AF either
through a user button or directly through
the rangender’s menu. Then, press the
user button assigned to Autofocus catch
(once) to active this feature. From that
point, you can regain manual focus con-
trol seamlessly as soon as the focus knob
passes over the measured AF position.
To Next Page
Loading...
