cmotion cPRO - Save to USB

All content © 2020, cmotion GmbH. All specications are subject to change without further notice.
http://www.cmotion.eu
page 46 of 120
UB1 allows you to change between UPER CASE, lower case and numbers.
UB2 allows you to delete the last set character.
UB3 allows you to select a previous set character. Once a character is highlighted in blue,
you can change it by using the thumb wheel or touch screen. To delete it, simply press
UB2.
Note: You can use a maximum of 18 characters to name a user prole.
Once you have created a name for your user prole, press “save” (MB3).
6.2.3.1.8.3. Save to USB
To save a user prole to a USB drive, insert the USB drive into to the cPRO hand unit’s
USB port and select “Save to USB” in the menu. Now, you can create and save a new
prole.
In order to create a new user prole, select “<new prole>” and press “name” (MB3). To
name the user prole, scroll through the alphanumeric characters using the thumb wheel
or touch screen. A minimum of two characters are required to create and save a user
prole.
Once the desired letter (or number) is highlighted in blue, press “select” (MB2) to set the
character. As an alternative, you can also tap the touch screen to conrm your selection.
UB1 allows you to change between UPER CASE, lower case and numbers.
UB2 allows you to delete the last set character.
UB3 allows you to select a previous set character. Once a character is highlighted in blue,
you can change it by using the thumb wheel or touch screen. To delete it, simply press
UB2.