Item Description
Enable IP Filtering
Please select Enable IP Filtering to filter IP addresses.
Local IP Address Please enter the IP address that needs to be filtered.
Protocol Please select the protocol type of the IP address.
Comment You can add comments for this regulation.
Apply Change & Reset
Click on Apply Changes to save the setting data. Or you may click on
Reset to clear all the input data.
Current Filter Table It will display all ports that are filtering now.
Delete Selected & Delete All
Click Delete Selected will delete the selected item. Click Delete All
will delete all items in this table.
Rest
You can click Reset to cancel.
5.4.3 MAC Filtering
This function can limit a specific MAC address to access the Internet. The network card, whose MAC
address is listed on filter table, will be denied the access request by router.
Item Description
Enable MAC Filtering
Please select Enable MAC Filtering to filter MAC addresses
MAC Address Please enter the MAC address that needs to be filtered.
Comment You can add comments for this regulation.
Apply Change & Reset
Click on Apply Changes to save the setting data. Or you may click on
To Next Page
Loading...
