6.4.4 Time Zone Setting
This function allows users to select their time zone and NTP server. Users can adjust the time
manually or through the NTP server.
Item Description
Current Time Users can input the time manually.
Time Zone Select Please select the time zone.
Enable NTP client update Please select to enable NTP client update or not.
Automatically Adjust Daylight
Saving
Please select to enable Automatically Adjust Daylight Saving or not.
NTP Server
Please select the NTP server from the pull-down list, or you can enter
the NTP server IP address manually.
Apply Changes & Reset &
Refresh
Please click on Apply Changes to save the setting data. Or you may
click on Reset to clear all the input data. Or you may click on Refresh
to update the system time on the screen.
6.4.5 UPnP Setting
Universal Plug and Play (UPnP) is a set of networking protocols promulgated by the UPnP Forum.
The goals of UPnP are to allow devices to connect seamlessly and to simplify the implementation of
networks in the home (data sharing, communications, and entertainment) and in corporate
environments for simplified installation of computer components. 3.5G server router supports UPnP
function, and can cooperate with other UPnP devices. When you activate UPnP, please click My
Please select
the time
zone.
To Next Page
Loading...
Need help?
General