Item Description
Enable Webcam Server
Select to “Enable” or “Disable” webcam server.
Image format The format is 320X240 pixels.
Preview Click on this button, you can preview the image from webcam.
Record Setting
Please see the detail advance setting in “6.3.3.2 Webcam
Advanced Configuration”.
Apply & Changes
Click on Apply button to continue. Click on Cancel button to clean
the setting on this page.
7.3.3.2 Webcam Server Advanced Setting
Click on “Record Setting” button, and the screen will appear as below.
Item Description
Save image interval
For saving image, you can set the save interval time, the default value
is 5 seconds.
Server Location
Set the save location for webcam image, you may save into USB HDD
or Remote FTP; if select save to Remote FTP, please continue
following remote FTP setting.
Remote FTP URL Input the FTP URL for saving webcam image.
To Next Page
Loading...
