CNET CWR-935M - Windows Vista IP Address Setup

17
2. Select ‘Obtain an IP address automatically’ and ‘Obtain DNS server address automatically’, then
click ‘OK’.
2.4.4 Windows Vista IP address setup:
1. Click ‘Start’ button (it should be located at lower-left corner of your computer), then click control
panel. Click View Network Status and Tasks, then click Manage Network
Connections..Right-click Local Area Netwrok, then select ‘Properties’. Local Area Connection
Properties window will appear, select ‘Internet Protocol Version 4 (TCP / IPv4), and then click
‘Properties’