Default Gateway
Please enter the Default Gateway address. If you don’t know the
address, please contact your ISP.
DHCP
Users can choose to enable DHCP service or not. The DHCP server
will give an unused IP address to a computer which is requesting for
one. That computer must be a DHCP client, and then it can obtain an
IP address automatically.
DHCP Client Range
The default value is 192.168.1.100 - 192.168.1.200. The DHCP server
will assign an IP to a computer from this range. The Show Client will
display every assigned IP address, MAC address, and expired time.
802.1d Spanning Tree
IEEE 802.1d Spanning Tree Protocol (STP) is a link layer network
protocol that ensures a loop-free topology for any bridged LAN, This
function is optional.
Clone MAC Address
If your ISP asks you to enter a specific MAC Address, please input the
correct info at the column.
Apply Change & Reset
Click on Apply Changes to save the setting data. Or you may click on
Reset to clear all the input data.
To Next Page
Loading...
Need help?
General