Chapter 5. Diagnostics
199
When using a Dual DSX-1 Interface the available diagnostics options are limited to the selections shown
in Figure 5-27.
] OD
17:24:18---------- [ Operate Diagnostics ]-------- 06/25/96
T1 Interface
Normal
Shelf Controls
--------------
C) Bypass E) Reset Common/Line Cards
D) Unbypass F) Unloop Line Cards
G) Shelf Restart O) Acknowledge ACO
H) Display Alarms
Q) Quit
** Warning: Ensure that a network clock source is
provided for the T1 port under test.
Are You Sure?
Y) Yes
N) No
[Y/N] Y
Figure 5-27. Dual DSX-1 Interface Mode Operate Diagnostics Screen
To Next Page
Loading...