coatmaster Flex
8.1.3. User Level
Figure 18: User level password
Figure 19: User level selection
The coatmaster® Flex can be operated in two
different User Level modes, the attributes of which
are given in Table 6: User Levels.
You can toggle between the different modes by
selecting the User Level menu. When this setting
option is selected for the first time, you will be
directed to a keyboard window to enter your user
level password. The Administrator password is
admino041.
Enter the password, using the arrow keys Ⓓ to
navigate the keyboard, in conjunction with the OK
button Ⓒ(see Figure 10: Input panel - keys and
elements) to validate a character and move to the
next one.
To validate the password, move the cursor down
with the arrow keys and Ⓓ into the ‘Enter’ field,
then press the OK button
Ⓒ
.
You can interrupt the operation at any time by
moving the cursor to the ‘Cancel’ key and
confirming with the OK button
Ⓒ
.
After validating the user level password, you must
choose the user
level (Standard/Admin). The
default User Level is Admin. Once you have
selected a user level, the level will be saved, even
if you switch off your device.
Whenever you are switching from the Standard
user level to the Admin user level, you must re-
enter the password as described above.
After the user level selection, you will be directed back to the system settings.
User
Level
Password
protected
Measurement
Block
Management
Application
Management
Factory
Reset
Standard No Measure Select Select No
Admin
Yes
Password:
Measure
Add Select
Rename Delete
Add Select Edit
Delete Favorite
Report
Yes
Table 6: User level privileges
To Next Page
Loading...
Need help?
General