coatmaster Flex
Foreword
Dear Customer,
with the purchase of a coatmaster® Flex, you have acquired a high-quality, precision product. In this
manual we provide you with some instructions to help you to work successfully and productively with
this device for many years. coatmaster AG has made every effort to manufacture a safe and high-
quality device that complies with all applicable regulations. Our strict quality control procedures
ensure high quality standards even for high volume production. Please apply your own controls and
treat the device with care. Should you have any questions regarding the use of the equipment, please
do not hesitate to contact us.
We wish you success and ‘a perfect coating’.
The Founders Prof. Dr. Nils A. Reinke and Andor Bariska
coatmaster AG
1. Technical Data
Characteristics Tolerance/ Description
Measuring distance range 20 - 150 mm
Measurement angle / tolerance
±70°
Measuring point size 2 mm
2
at 75 mm distance
Measuring range thickness 10 - 500 µm (depending on coating type)
Standard deviation Typical < 2% of the thickness
Measuring time Typical 300 ms (depending on setting for coating thickness)
Storage conditions -10 - 50°C max. 80% humidity (non-condensing)
Power supply Bosch GAL 18V-40
2x Bosch ProCore 18V, 4 Ah
Number of measurements Up to 1.300 measurements per battery charge (4 Ah)
Operating conditions Temperature: 0 - 35°C, Rel. humidity: 10% -75%
Weight (without battery) 1.3 kg
Dimensions 374 x 91 x 203 mm
IP protection type IP50
Table 1: Technical data
To Next Page
Loading...
Need help?
General