Coatmaster Flex User Manual

coatmaster Flex
31
8.3.3. Rename a block
To edit a block, select a block from the list and
choose ‘rename’.
If you choose a block within the list of available
blocks the color will change to light orange.
You can select the desired block by using the
up/down arrow keys   Ⓓ and the OK button Ⓒ
from the input panel.
To ’renam
e’ the desired block, use in the block menu
the left or right arrow key   Ⓓand the OK button
Ⓒ from the input panel.
Select the ’rename’ icon. You must confirm with ‘OK’.
In the submenu you can rename the block by
navigating the keyboard using the arrow keys Ⓓ
and entering the characters using the OK button Ⓒ
from the input panel.
Select ’OK’ to confirm the new block name.
To abort and return to the block menu, use the back
button Ⓑ.
Figure 31: Rename block
8.3.4. Remove a block
To delete a block, select a block from the list and
choose ‘remove’.
If you choose a block within the list of available
blocks the color will change to light orange. You can
select the desired block by using the up/down
arrow keys  Ⓓ and the OK button Ⓒ from the
input panel.
To ’remove’ the desired block, use in the block menu
the left or right arrow key   Ⓓand the OK button
Ⓒ from the input panel.
Select the ’remove’ icon and confirm.
To abort and return to the block menu, use the back
button Ⓑ.
Standard users cannot ‘remove’ blocks! This option
is then greyed out and cannot be selected!
Figure 32: Remove block

Coatmaster Flex Specifications

General

Brand	Coatmaster
Model	Flex
Category	Measuring Instruments
Language	English