coatmaster Flex
7.4. Language Selection
After switching on the coatmaster® Flex, you will be directed to the language selection menu.
Figure 10: Language selection
The default language is English.
Available languages:
Bulgarian, Czech, German, Greek, English,
Spanish, Estonian,
Finnish, French, Hebrew,
Indonesian, Italian, Japanese, Korean, Polish,
Portuguese, Romanian, Russian, Slovenian,
Serbian, Thai, Turkish, Vietnamese, Indian,
Chinese
Move the cursor to your
using the up and down arrow keys Ⓓ and the OK
button Ⓒ to confirm.
You will then be taken to a 'Settings' menu.
7.5. Wi-Fi Settings
To use your coatmaster® Flex, you must set it up to connect to a Flex server by Wi-Fi connection. The Flex
server can either be a coatmaster® Cloud server (through internet connection) or a coatmaster® Local
server (no Internet required). To connect to the coatmaster® Cloud server, a connection to the Internet is
necessary. If no Internet access is possible, a coatmaster® Local server must be used.
The Wi-Fi connection setup must be conducted only once for the activation of the coatmaster® Flex (see
Figure 11). The login credentials are stored on the device, and afterwards the Flex will automatically try
to connect to previously stored Wi-Fi networks.
If no connection is stored, the Flex will automatically start the Wi-Fi network connection process. To connect
to a new Wi-Fi network, select the “Systems Settings” icon in the main display (see Figure 26), then select
“Network”.
When starting the coatmaster® Flex for the first
time, it will automatically connect to the
coatmaster® Local server, if available. If not, after
language selection, the device opens the Wi-Fi
network subme
nu so that you can select the
network you wish to connect to.
Choose your local Wi-Fi network in the list using
the up/down arrow keys Ⓓ
button Ⓒto validate.
The coatmaster® Flex supports two Wi-Fi security
standards: WPA2 (only password required) and
WPA2-Enterprise (username
required).
To Next Page
Loading...
Need help?
General