Coatmaster Flex - Page 28

coatmaster Flex
29
The following options are available in the main
menu:
a. Access to the application menu
Use the left or right arrow key   Ⓓand the OK
button Ⓒ to select the application.
b. Access to the block menu
Use the left or right arrow key   Ⓓand the OK
button Ⓒ to select the block.
c. Triggering a measurement
Press the Trigger button ① (see Figure 4:
Overview dimensions and components) to start a
measurement.
d. Display last twelve measurements
Use the up-arrow key Ⓓ to display the last
twelve measured values numerically in the
display. Use the down arrow key Ⓓ to return to
the main menu.
e. Display trend chart
Use the down arrow key Ⓓ
to display
graphically the measured values in the trend
chart. Use the up-arrow key Ⓓ to return to the
main menu.
f. System settings
Use the left or right arrow key   Ⓓ and the
OK button Ⓒ to select system settings (see 8.1
System Settings).
Use the back button Ⓑ to return to the main menu or
to move one menu level up.
Figure 27: Display last twelve measurements
Figure 28: Display trend chart