Coatmaster Flex User Manual

coatmaster Flex
57
16
Photodetector signal clipping.
• Contact the Technical Support (details on page 2) for further assistance.
17
Wrong acquisition parameter.
• Contact the Technical Support (details on page 2) for further assistance.
119
Optimization start time not found.
• Contact the Technical Support (details on page 2) for further assistance.
120
Photodiode cutoff not found.
• Contact the Technical Support (details on page 2) for further assistance.
471
Fit error.
• Check application
•
If the application was working previously, look for dirt on the lens or flash.
• Contact the Technical Support (details on page 2) for further assistance.
472
Fit warning.
• Check application
• If the application was working previously, look for dirt on the lens or flash.
•
Contact the Technical Support (details on page 2) for further assistance.
995
Range based error.
• Contact the Technical Support (details on page 2) for further assistance.
999
Failure in algorithm.
• Contact the Technical Support (details on page 2) for further assistance.
9992
Theta matrix inconsistent.
• Contact the Technical Support (details on p. 2) for further assistance.
9993
Negative slope.
• Contact the Technical Support (details on p. 2) for further assistance.
Table 8: Error codes and corrective measures

Coatmaster Flex Specifications

General

Brand	Coatmaster
Model	Flex
Category	Measuring Instruments
Language	English