Chapter 3: Calls, faxes and SMS
SMS service 95
3333
4. Type in the message in the Write new message field.
If the message text is too long for one SMS, the message is sent as two
or more SMS messages. The field below the message field shows the
number of SMS messages used to send the message.
5. Type in the phone number in the Recipient field.
Remember 00 or + and country code (e.g. 00 45 to call Denmark or
00 1 to call USA).
6. Select whether or not you want Delivery notification for this SMS
message.
If you click Yes, the Status column in the Sent folder will show the status
of your message when it has been sent.
You can set up delivery notification generally for all SMS messages. This
setting is used by default when you send a message. For further
information, see Configure message settings on page 99.
7. Click Send. The message is now sent and moved to the Sent folder.
One SMS messages can have 160 characters. However, the system will
allow you to input a longer message, which will then be divided up and sent
as multiple SMS text messages. Have this in mind when you write messages.
The more messages you have to send, the more transferred data you are
charged for.
Options for messages in the Outbox
Messages in the Outbox are messages that have not been sent, e.g. because
the system was not online when you attempted to send the messages. To
access the Outbox, click MESSAGES > Outbox from the navigation pane.
You have the following options for messages in the Outbox:
If the system is not online when you attempt to send a
message, the message is moved to the Outbox instead of the
Sent folder. Messages in the Outbox are not automatically
sent when the system goes online. For further information
on the Outbox, see the next section, Options for messages
in the Outbox. To make sure a message has been sent, check
that it has been moved to the Sent folder.
To Next Page
